In this guide, you have a step-by-step walkthrough you can take when installing an eSIM on your Huawei device manually.
Before attempting to install the eSIM, there are three main things you will need:
-
A strong internet connection - Ideally you will need to either be connected to Wi-fi or have a good 4G signal
-
An eSIM compatible device
-
Unlocked device
After installation, ensure that "Data Roaming" is Enabled/ON. Otherwise your data will not work.
1. Go into Settings.
2. Click onto "Mobile Networks" > Sim Management.
3. Click on an eSIM > Add eSIM.
4. Click "Enter Manually".
5. Type in the SM+DP Address as shown on the photo below (Top Row) followed by the Activation code which you can find on your Bundles account. You can find this information in the confirmation email or on the order confirmation page, or in the Seyyah Mobile account page.
You may leave the Confirmation Code field empty.
6. Click "Add this eSIM" > Wait for the eSIM to download.
Note: This may take up to 10 minutes, please do NOT close this, or the installation will stop.
7. Once completed, your eSIM should appear in the list. > Make sure the eSIM is enabled, or the eSIM won't work.
Note: Once you have completed these steps, make sure your Data Roaming is "ON" as seen in the photos below, otherwise you will not be able to use the eSIM.
