How to install an eSIM using a QR Code on Google Devices

Before attempting to install the eSIM, there are three main things you will need:

  • A strong internet connection - Ideally you will need to either be connected to WI-FI or have a good 4G signal

  • An eSIM compatible device

  • Unlocked device

Do not forget to turn on "Data Roaming" once the installation is complete. Otherwise your eSIM will not work. 


1. Go into your Settings.

2. Click on "Network and Internet".

install.png

3. Click the "+" next to "Mobile network".

install_3_.png

4. On this screen, tap "Don't have a SIM card?" > Click "Next".

 


install.pnginstall_1_.png

5. Scan the "QR Code" you can view in your eSIM Bundles account. You can find this information in the confirmation email or on the order confirmation page, or in the Seyyah Mobile account page.

Screenshot_20230222-155438.png

6. On the "Data eSIM" screen, click "Activate" > Wait for it to finish.

Note: Allow up to 10 minutes for this to complete, please do NOT close this, or the installation will stop. 

 

 


install_2_.pnginstall_3_.png

7. Once the eSIM has been successfully activated, you will be bought to a screen where you can choose which sim you would like to use for your number.

install_4_.png

Note: Once you have completed these steps, make sure your Data Roaming is "ON" as seen in the photos below, otherwise you will not be able to use the eSIM.

 


install_2_.pnginstall_1_.png