Installation
1. Go into your "Settings" and click on "Mobile Data / Cellular".
2. Tap "Add eSIM" > "Use QR Code" >
- You can use your camera and scan the QR code went you and skip all steps below.
or
Enter Details Manually.
3. Enter the "SMDP Address" and the "Activation Code" provided, (these can be found in your eSIM folder by the provider you purchased from.) > Tap "Next"
Leave the "confirmation code" section blank.
4. Click "Continue" and wait for it to finish.
Note: This may take up to 10 minutes, please do NOT close this, or the installation will stop.
5. Once completed, click "Done".
You will now have the option to modify the name of the "eSIM label" which is the name of the Sim. If you do not wish to do this, you can skip ahead to step number
6. If you would like to modify the name of the "eSIM" now, follow these steps:
Tap ">" Then either choose one of the preset names or type the name you would like to use in the "Custom Label" box > Tap "Done" > Tap "Continue".
As you can see from the example below, the "eSIM Label" was changed from "Mobile Data" to "Travel" in the preset box.
7. Configure the following settings as suggested below:
-Set Default Line to "Primary".
-Set Mobile Data to your previously chosen eSIM, in this example "Travel".
8. The eSIM is now installed and set up.
Reminder: Data Roaming MUST be "ON" in order for the eSIM to work.
9. Go back into "Settings" > Tap "Mobile Data / Cellular" > Scroll to find "Data Roaming" and toggle the switch to "ON"