In this guide, you have a step-by-step walkthrough you can take when installing an eSIM on your OPPO device with QR code.
Before attempting to install the eSIM, there are three main things you will need:
-
A strong internet connection - Ideally you will need to either be connected to Wi-fi or have a good 4G signal
-
An eSIM compatible device
-
Unlocked device
1. Go into Settings.
2. Go into "Mobile network"
3. Click eSIM
4. Select "Add eSIM"
5. Press "Next"
6. Press "Next" > Scan the "QR Code" given through your eSIM Bundles account. You can find this information in the confirmation email or on the order confirmation page, or in the Seyyah Mobile account page.
7. Click "Download" and it will enable the installation process.
Note: This may take up to 10 minutes, please do NOT close this, or the installation will stop.
8. Once your eSIM has installed, press the "Settings" button in the bottom right corner.
9. Once back in settings, click on "eSIM".
10. Ensure your eSIM is enabled by clicking the three dots on the right-hand side > "Enable" > "Yes".
11. Make sure your Data roaming is on, or the eSIM will not work. You can do this by Going back into Mobile Network > Data eSIM
12. Once in this section > Click the slider next to Data roaming and make sure that it turns blue (enabled)
